三羰基铬苯乙烯甲酰衍生物的质谱研究

近年来,随着对金属有机化合物的研究的不断深入,人们对它们的兴趣已由对结构、化学性质的探讨而扩展到对物理性质的研究,如磁性质、导电性、光学性质,并从中发现某些金属有机化合物,如某些芳基三羰基铬络合物及二     

高效液相色谱-电感耦合等离子体发射光谱联用的瞬时信号采集和处理软件及实际应用

本文对高效液相色谱-电感耦合等离子体原子发射光谱联用技术进行了研究.对所用ICAP-9000型等离子体原子发射光谱仪的控制采样程序进行了部分修改,采集的数据通过异步串行通讯方式由AppleⅡ微机传送至IBM PC286机进行处理。发展的瞬时信号采集程序能满足HPLC的检测要求,并将这一联用技术成功的用于砷的形态分析.     

一阶导数停流法测定药物和饮用水中的铁

本文利用Ｆｅ＾３＋离子催化Ｈ２Ｏ２氧化四甲基对苯二胺的反应，将采用停流技术获得的动力学曲线转换成一阶导数曲线，根据导数峰高值与Ｆｅ＾３＋离子浓度的线性关系测定药物和自来水中的含量，本方法的线性范围为４．０－４０．０ｎｇＦｅ＾３＋／ｍｌ，相对标准偏差小于２．５％，标准加入回收率在９８．７％－１０１％之间，检测限为１．９２ｎｇＦｅ＾３＋／ｍｌ。对照实验结果表明，导数动力学法比一般非导数动力学法具有线关     

Silicate Xerogels with Dopant-Induced Chirality

A series of silicate xerogels with entrapped chiral amino acids have been obtained via sol-gel technology. The transparent, glassy samples obtained exhibit chirality in the bulk due to the presence of the entrapped asymmetric molecules. Measurements of the optical activity of the doped xerogel samples revealed that the entrapment did not significantly influence the optical activity observed for liquid solutions of the amino acids. Thus, the sol-gel method enables the preparation of amorphous optical materials exhibiting properties of strictly spatially defined molecular systems. Apart from the obvious optical applications, such porous materials with asymmetric centers might find interesting applications in chiral chemical syntheses and separations.     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.     

New stationary phases of conjugated π-electron systems for HPLC—characterization of structure and dynamics by solid state NMR spectroscopy

Four new stationary phases for HPLC were prepared by modifying silica gel with a trifrnctional aminoalkyl silane. A conjugated π-electron system was linked to the amino group either directly or with a carboxylic anhydride as a spacer in between. Characterization and dynamic measurements of the new stationary phases were performed by solid state NMR spectroscopy. The results of the ²⁹si and ¹³C CP/MAS techniques were compared with the recently developed ¹H MAS-only technique. Despite strong homonuclear dipole-dipole interactions it was possible to obtain well resolved ¹H MAS spectra of those stationaru phases with a high degree of crosslinking. Limited mobility of the aromatic ligand fragments is common for all examined stationaryu phases. The chromatographic properties of the new phases were tested by their ability tio sepatate a mixture of eight PAHS. It could be shown that the π-π interaction mechanism is responsible for the separation of the eight PAHs, because the elution order of the PAHs did not changem despite the use of both a nonpolar mobile phase (n-heptane) and a polar mobile phase (methanol/ water mixture).     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.     

全二维液相色谱（NPLC×RPLC）接口及其应用

用内径为0．53mm的填充毛细管正相液相色谱为第一维，用4．6mm（i．d．）×50mmRP-18e整体柱反相色谱为第二维，建立了定量环一阀切换接口的全二维液相色谱系统（NPLC×RPLC）．第一维色谱分离洗脱出的组分交替存储在十通阀上的两个定量环中，同时定量环中前一个组分被转移到第二维进行反相分离．因为第一维的流动相流量仅是第二维的1／500，自然解决了流动相兼容问题．采用芳香族化合物的混合物和中药丹参正己烷提取液对该全二维液相系统的分离能力进行了评价．